Why a Power Conditioner?

Do you love music and want to enjoy it to the fullest every day? Your audio system will only play as well as its weakest part - and this is often an underestimated power supply.

It doesn't appear only pure voltage in the power distribution systems of your homes, but also a large „pollution“, the so-called „harmonic noise“. It´s caused by large factories, powerful engines that are powered from the power network, as well as „transmitting networks“ - FM radio, 3G, 4G and 5G mobile networks, home Wi-Fi, but also by communication between Bluetooth devices. This harmonic noise can definitely degrade the resulting sound. With the increasingly intense presence of these technologies in our surrounding, their impact will certainly only increase. Therefore it´s necessary to filter out these unwanted frequencies accumulated in the power distribution lines before they can enter your audio system and thus distort its sound - because the reproduced music is actually nothing more than an electronically processed electric current, which is subsequently converted into the movement of the speakers, and therefore, if the supply current is distorted, the output must necessarily be distorted as well. The higher the quality of the assembly, the higher its resolution, the more obvious this problem is and the greater benefits our products offer to you.

We use a globally unique know-how and our filter devices operate with much higher efficiency than any of the others with whom we have ever encountered. The proof of this fact for us is a number of satisfied users, expert reviews with excellent recommendations, contributions to discussion forums, etc.

What to expect after connecting our power conditioner?
Your music will fill the listening space, will come out of the speakers, will have a wider right-left and front-rear space, as well as clearly improve the separation of individual instruments and increase the perceived resolution due to the absence of distortion and background noise.
We build our filters to guarantee zero compression in dynamic range - your assembly will finally be able to sound in full.


AC Input Voltage: 230V ~ 50/60Hz ±10%
Maximum input current: 12A
AC Output Voltage: 230V ~ 50/60Hz ±10%
Continous Output power: High Power out – 2100W (9A)
Low Power out – 450W (2A)
Maximum Input power: 3 000VA
No load consumption: 13W
Operating Temperature: -10°C - +50°C
Overrvoltage and current peak protection: Active also in power-off mode
Maximum absorbed peak current impulse: 20 000A (380Joule - 8x20µs) input
30 000A (570Joule - 8x20µs) outputs
Overvoltage protection: Auto shutdown >255V - LED indication
Surge protection: Lightning protection 20 000A
Short-circuit protection: 10A INPUT, 2A LOW POWER OUTPUTS
Soft start: Current peak maximum 5A
Filtering frequency: RFI/EMI 30 kHz - 1GHz/20-100dB
Weight brutto without power cable: 45kg
Type of sockets: Input - Neutrik PowerCon 32, outputs 6xEU(Schuko)
Galvanic isolation: Input/Outputs
Hi-power outputs/Low-power outputs
Operating humidity: maximum 85% non condensing
Voltage measuring accuracy: ±1,5%
Enclosure protection: IP20
Dimensions (W x H x D): 450 x 150 x 410 mm
0 W Continues power
0 W Peak
0 dB Suppresion of harmonic
0 A Overvoltage
0 kg Weight


AC Input Voltage: 230V ~ 50/60Hz ±10%
Maximum input current: 20A
AC Output Voltage: 230V ~ 50/60Hz ±10%
Peak power 10 000W
Max. 3V
100 000A (1900Joule pulz 8x20µs)
Filtering frequency: RFI/EMI 1 kHz - 3GHz 15-98dB
Weight brutto: 19kg
Type of sockets: 4xEU(Schuko) Furutech NCF
Dimensions (W x H x D): 450 x 120 x 310 mm
0 W Peak
0 A Maximum input current
0 dB Suppresion of harmonic
0 A overvoltage
0 kg Weight

Harmonic Hammer Cable

Characteristics of Cable HH-C01

  • Rhodium-plated cable end of the highest quality
  • Specially designed geometry
  • 12 core cable from a German manufacturer
  • Neutrik PowerCon HIGH-END connector with 32A load capacity
  • Double shielded cable for effective ambient interference suppression


Bc. Petr Geryšer

Bc. Pavel Geryšer



Harmonic Hammer